• +49(0)40 – 244241680, Mo to Fr 9am - 6pm
  • discrete shipping and free from 150€ (all over Europe)
  • Fast and safe delivery worldwide

SMSCOM Hybrid Controller Pro 4A

Item no.: 11824

299,00 €
269,00 €

including 19% VAT. , plus shipping

Available now , Shipping time: 1 - 3 workdays

Description

SMSCOM Hybrid Controller Pro 4A

The Hybrid Controller Pro - noiseless and fully automatic!

This device for an automated fan control combines the advantages of an automatic temperature control via a sensor with the "hearable" benefits of a step transformer. The Hybrid Controller Pro uses software-based temperature sensor technology combined with a mechanical system to control the fan speed. It keeps the temperature in the room constant and simultaneously ensures a constant air flow. The ideal solution for maximum noise reduction during the operation of exhaust fans - no humming or buzzing from any kind of fan - GUARANTEED!
In addition, the PRO software of the Hybrid Controller will keep the humidity under control as well, in fact when it matters the most ? during the night-cycle!

Achieving the correct negative air pressure
Always choose fans with a difference in airflow capacity. For example, choose a 1500m3/hr and a 3000m3/hr. The ventilation system will now automatically create the correct negative air pressure. Make sure, that the smaller fan is connected to the ''FAN AIR IN'' power outlet and the larger fan to the '' FAN AIR OUT '' power outlet. Of course you can connect only a single fan if required. Connect a fan of no more than the total amps of the controller to the '' FAN AIR OUT '' power outlet. The Hybrid Controller PRO will bring the fans automatically and progressively to the appropriate speed, which is needed to maintain the desired temperature.

Instructions:
1 . Connect the fans to the blue sockets (small fan = IN / large fan = OUT)
2 . Set the MINIMUM fan speed with dial 1 (e.g., level 1)
3 . Set the desired temperature using dial 2 (e.g. 25 °C )
4 . Set the MAXIMUM fan speed with dial 3 (e.g., level 5 )
5 . Place the temperature sensor in your room. Note; do not place in direct airflow or directly under a light source.
6 . Place the light sensor in the room, facing the light source; do not remove the cap yet! *
7 . Now connect the Hybrid Controller PRO to the power source.

* PRO function deactivated (cap is on the sensor)
As long as the cap is not removed, the PRO function will not be activated. Use the PRO feature only when humidity control is critical.

* PRO function activated (cap removed)
The PRO feature ensures that extra air is refreshed at night, even if the temperature does not require more ventilation.
As soon as the sensor detects that it is dark, the fans will run 1 level faster for 7 minutes every hour.
The high humidity that occurs during the night will thus be removed from the room.
This slight increase of the fan speed will not affect the temperature.
Since moisture problems generally occur at night, the PRO function will turn off as soon as the light turns on and the controller will run in the normal mode.
Please note, that once the PRO feature is activated, you only can disable this function by a reset. (Briefly unplug the Hybrid Controller from the power, replace the cap on the sensor, then plug the controller back in).

Maximum load: 4A or 900 watt
(The total wattage that can be obtained from the entire device. Either split or through a single outlet.)
more
less
Manufacturers
Product weight: 4,82 Kg

Manuals and Downloads

for SMSCOM products

Ratings (1)

5 from 5 Perfect

Works perfect, no humming. And also a very nice price.

,08.06.2017

Customers have also bought the following items