SANlight EVO 4-120 1.5 with 265W LED grow lamp - plant lighting at the highest level.
The EVO 4-120 1.5 is the manufacturer's warmest recommendation for all areas with a maximum depth of 120cm. The lighting intensity achieved is at the maximum of what SANlight can just recommend without a separate CO2 feed. With 265W and 725µmol/s per individual lamp, impressive lighting intensities can be achieved with two LED grow lamps on an area of 1.2x1.2m. Thanks to the secondary optics, the possibility to adjust the tilt angle and the correct positioning, you can achieve high lighting values even in the farthest corners without losing homogeneity. Unlike other luminaires, you do not have a central hotspot and distribute the light more evenly over your plants. The possibility of optional dimming allows you to react individually to the needs of your plants.
Here we list numerous facts about the new Sanlight EVO series LED grow lamp.
Efficiency is not just a number in the data sheet
With the EVO series, SANlight offers an advanced efficiency of more than 3µmol/J at module level. However, much more attention was paid to the yield per area and time during the development. In countless empirical tests, the spectrum was optimised as best as possible. The resulting broadband light spectrum extends beyond the conventional PAR range and offers a Far Red to Red ratio, which positively influences photo-morphogenesis and thus also the quality and quantity of the harvest.
Protection and light control
As in the past, SANlight remains true to its very high quality standards. Thus, only 10% of the light output is degraded over a service life of 90,000h. In the development of the EVO series, the protective and light-directing secondary optics were optimised to the geometric dimensions of the luminaire. This results in an incredibly homogeneous illumination with the best light intensity (PPFD). The asymmetrically emitting secondary optics also minimises losses during the transport of photons to the plants and at the same time protects the Leds from environmental influences to which the luminaire is exposed during plant cultivation. Sulphur and other chemical substances cannot penetrate to the LED. This prevents oxidation of the Led chip reflector. The optics can be cleaned without any problems. The protection and the possibility of cleaning guarantee a constant light output for many years.
Finest technology
SANlight has selected only the best for you from an almost unmanageable selection of Leds available on the market. For red and far-red Leds, SANlight has chosen the latest OSRAM High Power Leds, as it did years ago. For the white LEDs, SANlight has chosen the patented WICOP technology from Seoul Semiconductor. The LEDs with this technology are characterised by special robustness and best efficiency due to the absence of lead frames and silver.
Ready-to-dim
Every model of the EVO series is "ready-to-dim". This means that the LED lamp is compatible with the typical control systems used in greenhouse technology. Alternatively, you can retrofit the LED grow light with the available Magnet Dimmer or Bluethooth Dimmer. Compared to rotary potentiometers, SANlight dimmers are wear-free and cannot be affected by humidity and water.
Professionalism starts with the cable
In the EVO series, all plug connections are made with high-quality waterproof connectors, which have established themselves in commercial horticulture over the past decades. All accessories offered by the manufacturer are designed for the harsh greenhouse environment. This means that you can easily and safely configure your system, dim it or connect it to form a daisy chain.
Maximise
In most grow rooms, filters and ventilation systems are mounted on the ceiling. With the EVO series, the required equipment can be positioned between the LED lights and not a single cm of usable height is lost. Lighting systems from other manufacturers have to be mounted below the ventilation system due to their design. This wastes a lot more space. This applies to small grow tents as well as to large professional installations.
Technical data EVO 4-120 1.5:
- 2x EVO 4-120 1.5 LED are optimal for a base area of 120x120cm.
- Power consumption: 265W
- Power factor: > 0.95
- Input voltage range: 100-240/277 50/60 Hz
- Maximum input current: 1.1@220Vac
- Protection class: IP65
- Permissible ambient temperature: 5-35°C
- Max. relative humidity: 99%
- Emission wavelength: 400-780 nm
- Photon flux density: 725 µmol/s
- Efficiency: > 3 µmol/s
- Beam angle: 90-112°
- Weight: 5.1 kg
- Dimensions (LxWxH): 1018x291x116 mm
- Lifetime: 90% light output achieved after > 90,000 Hours
Details:
- Recommended lighting solution for areas with 120cm depth or 120 tents.
- Designed for use without additional CO2
- 265W and 725µmol/s
- Impressive lighting intensity when using 2 luminaires on 120x120cm
- Tilting of 11° allows optimum control of the beam pattern
- Highest possible homogeneity at short distance and illumination intensity
- No central hotspot, the light is distributed evenly over the area
- Optional dimming allows the intensity to be adjusted to the growth stage
Scope of delivery:
- 1x EVO 4-120 1.5 with 265W
- 1x Power cable for EVO series
- 1x Magnetic dimmer for EVO LED series
- 1x Prohanger set for Suspension
