SANlight EVO 4-100 1.5 with 265W LED grow lamp - plant lighting at the highest Level
For all those who want to get the extreme out of their grow box and are not afraid of using CO2, the EVO 4-100 1.5 is the measure of all things. Two lights per square metre produce the highest lighting intensities, which go to the maximum of what plants in flower can handle with additional CO2. For your vegetative plants, SANlight recommends either using only one luminaire or, to maintain homogeneity, using 2 luminaires with the dimmers. 265W and 725µmol/s make for a really powerful LED light that is not for beginners.
Here we list numerous facts about the new Sanlight EVO series LED grow light.
Efficiency is not just a number in the data sheet
With the EVO series, SANlight offers an advanced efficiency of more than 3µmol/J at module level. However, much more attention was paid to the yield per area and time during the development. In countless empirical tests, the spectrum was optimised as best as possible. The resulting broadband light spectrum extends beyond the conventional PAR range and offers a Far Red to Red ratio, which positively influences photo-morphogenesis and thus also the quality and quantity of the harvest.
Protection and light control
As in the past, SANlight remains true to its very high quality standards. Thus, only 10% of the light output is degraded over a service life of 90,000h. In the development of the EVO series, the protective and light-directing secondary optics were optimised to the geometric dimensions of the luminaire. This results in an incredibly homogeneous illumination with the best light intensity (PPFD). The asymmetrically emitting secondary optics also minimises losses during the transport of photons to the plants and at the same time protects the Leds from environmental influences to which the luminaire is exposed during plant cultivation. Sulphur and other chemical substances cannot penetrate to the LED. This prevents oxidation of the Led chip reflector. The optics can be cleaned without any problems. The protection and the possibility of cleaning guarantee a constant light output for many years.
Finest technology
SANlight has selected only the best for you from an almost unmanageable selection of Leds available on the market. For red and far-red Leds, SANlight has chosen the latest OSRAM High Power Leds, as it did years ago. For the white LEDs, SANlight has chosen the patented WICOP technology from Seoul Semiconductor. The LEDs with this technology are characterised by special robustness and best efficiency due to the absence of lead frames and silver.
Ready-to-dim
Every model of the EVO series is "ready-to-dim". This means that the LED lamp is compatible with the typical control systems used in greenhouse technology. Alternatively, you can retrofit the LED grow light with the available Magnet Dimmer or Bluethooth Dimmer. Compared to rotary potentiometers, SANlight dimmers are wear-free and cannot be affected by humidity and water.
Professionalism starts with the cable
In the EVO series, all plug connections are made with high-quality waterproof connectors, which have established themselves in commercial horticulture over the past decades. All accessories offered by the manufacturer are designed for the harsh greenhouse environment. This means that you can easily and safely configure your system, dim it or connect it to form a daisy chain.
Maximise
In most grow rooms, filters and ventilation systems are mounted on the ceiling. With the EVO series, the required equipment can be positioned between the LED lights and not a single cm of usable height is lost. Lighting systems from other manufacturers have to be mounted below the ventilation system due to their design. This wastes a lot more space. This applies to small grow tents as well as to large professional installations.
Technical data EVO 4-100 1.5:
- 1x EVO 4-100 1.5 LED is optimal for a base area of 100x100cm
- Power consumption: 265W
- Power factor: > 0,95
- Input voltage range: 100-240/277 50/60 Hz
- Maximum input current: 1.1@220Vac
- Protection class: IP65
- Permissible ambient temperature: 5-35°C
- Max. relative humidity: 99%
- Emission wavelength: 400-780 nm
- Photon flux density: 725 µmol/s
- Efficiency: > 3 µmol/s
- Beam angle: 90-112°
- Weight: 4.8 kg
- Dimensions (LxWxH): 818x291x116 mm
- Lifetime: 90% light output achieved after > 90,000 hours
Details:
- High intensity solution for 100cm deep areas or 100s of tents
- CO2 supplementation or dimmer recommended
- 265W and 725µmol/s produce highest intensities
- Secondary optics maximise homogeneity
Scope of delivery:
- 2x SANlight EVO 4-100 1.5 with 265W
- 1x SANlight Power cable for EVO series
- 1x SANlight H-distribution block
- 2x SANlight Extension cable 1m straight socket
- 1x Legrand timer Omnirex
- 2x Lighthanger set for suspension
Note: Magnetic dimmer or Bluetooth dimmer are available as Options.
