1
Shipping only 6,90€ within the EU for orders under 99€* ×
free shipping within EU from 99 € Call us on: +49(0)40-244241680 (Mon to Fri 9 am - 6 pm) Free shipping within the EU from 99 € Fast and reliable delivery worldwide

SANlight magnetic dimmer for EVO-LED series

Item no.: 18286

  • for Sanlight Grow-LED EVO
  • 4 steps switchable 100%, 80%, 60% and 40%
32,90 €

including VAT. , plus shipping

available

Shipping time: 1 - 3 working days

Description

A dimmer is required for each Sanlight EVO that is to be dimmed.

The M-Dimmer connection is colour coded. Connect the M-Dimmer (blue socket) with the blue three-pin socket of the LED light.

Note:
since the M-Dimmer can be set using a magnet, there should be no external magnetic fields in its vicinity. A minimum distance to mains cables of 30 cm is recommended.

The M-Dimmer is supplied by the LED light and is only active if the LED light is also switched on.

2 different functions of the M-Dimmer can be set with the magnetic clip. To do this, hold the respective side of the clip approximately to the middle of the dimmer.

Dimmer temperature range: 0 - 70°C Supply +12V DC via LED light, max. 20mA, never connect to 230V AC.

To dim (white side to the dimmer)
4 different power levels (100%, 80%, 60% and 40% of the nominal power of the light) can be set; the currently set power is displayed via 3 green LEDs:
  • 3x Green LEDs constantly on, Output 100%
  • 2x Green LEDs constantly on, Output 80%
  • 1x Green LEDs constantly on, Output 60%
  • Green LEDs all off, Output 40%
Fade in active (black side to the dimmer)
The output of the LED light is slowly increased when switched on. The lamp goes from 10% to 100% power or the respectively set DIM value in about 5 minutes (e.g. to 80% in about 4 minutes, to 60% in 3 minutes etc.)
  • Orange LEDs, Status Flashing, Fade in activated, power is slowly increased
  • Orange LEDs, Status Constantly on, Fade in turned on but not active
  • Orange LEDs, Status Constantly off, Fade in disabled
ATTENTION: only for LED lights of the EVO-series
This M-Dimmer is only suitable for operation on the following with the EVO-series models: EVO 3-60, EVO 3-80, EVO 3-100, EVO 4-80, EVO 4-100, EVO 4-120, EVO 5-100, EVO 5-120, EVO 5-150.

Manufacturers: SANlight
Product weight: 0,06 Kg

Ratings

Write your first review and help others with their purchase decision:

Loading ...