Elektrox 200 Watt CFL energy-saving lamp for the flowering phase
Highly efficient energy-saving lamp 200W with built-in ballast for the flowering phase 2700K (red colour spectrum). Optionally we recommend the reinforced Stucco reflector with E-40 socket and cable strain relief, this is characterised by its absolutely high stability.
Technical data:
- Power: 200 watts
- Colour temperature: 2,700 Kelvin
- Low heat development
- High light intensity
- Low power consumption
- 230 Volt/ E40 socket
- Luminous flux: 12,000 lumen
- Luminous efficacy: 60 Lm/W
- Dimensions:
- Length with socket approx. 40cm
- Without socket approx. 26cm
- Diameter 10cm (with VSA 12cm)
Attention
Be extremely careful when screwing in a CFL, because the neon tubes that make up the energy-saving bulb are fragile. Never touch the glass of the bulb with your hand, the grease from your fingers is harmful to the life of the CFL! Use a cloth or gloves to screw in the bulb.
As mentioned in the description above: A standard hammer cap is not suitable because of the weight of the CFL saving bulb. The hammer cap can sag, which has a detrimental effect on the light distribution and can damage the energy-saving lamp.
